The technical control is a legal obligation for your vehicle to circulate. Even if your car has a few years and miles on the clock, it can pass the technical control provided you have prepared. Here are the main points to check before passing a technical inspection .

What is technical control?

The technical control is a check of 124 points on your vehicle. Some do not prevent your vehicle from driving, but 72 of them are mandatory. If any of these points are not up to standard, you will be notified, and you will have to make the necessary repairs for the counter-visit within two months. This counter-visit will incur an additional cost.

Perform a technical pre-inspection

Take advantage of your annual review to ask your garage to check the essential points of the technical control . It will ensure that everything is consistent, and possibly offer some modifications or repairs to perform. Sometimes it is simply a license plate to be refixed or a light bulb to change, which does not involve a prohibitive cost. In any case, these repairs will be mandatory if you have a counter-visit to perform.

The points that you can check

There are points blocking the technical control , which you can check for yourself, with the naked eye. So, make sure that the body of your car is in a good condition, that is to say it can not hurt anyone. For example, a crooked doorbell can cause damage. As much as remove it since it is only decorative. For your lights, turn them on, and see if they are all working. The cost of a light bulb is lower compared to that of a counter-inspection of technical control . A cracked windshield must also be changed before the technical inspection , and the brake fluid must be in sufficient quantity. Your vehicle must be equipped with seat belts, rolled tires , and license plates must be clean, secure and legible.